[Standard—Nortel Networks Confidential]
82
Setting DHCP parameters
After pressing the Ok softkey on the last configuration parameter, you will
see a message "Locating Server".
Where to go next
After the i2004 Internet Telephone has successfully located the server, follow the
instructions in the following table.
Table 11 Initializing options after setting parameters
If ...
the telephone successfully connects to the
server and the display prompts you to enter
an activation key
Ok
the telephone successfully connects to the
server and the idle display screen appears
OnHook
Welcome
View Servcs DND Config
NN10042-113
06/06
9:31 am
Activate
Enter Activation Key
And Press Ok
>
Alpha
Tom
06/06 9:31 am
Then ....
go to
"Step 1: Enter an activation key" on
page
6.
you are ready to use your telephone. Go
to
Chapter 2, "Introducing the i2004
Internet Telephone," on page
13.