Handling Precautions - Contec IPC-DT User Manual

Handling Precautions

Take the following precautions when handling this board.
- This display is made of the precise electric parts, so do not use or
store it in the vicinity of impulse or vibration.
- This product is not intended for use in aerospace, space, nuclear
power, medical equipment, or other applications that require a
very high level of reliability. Do not use the product in such
applications.
- If you utilize this product in such usages where high reliability
and safety are required as on the trains, vessels, automotives or
crime- or disaster-prevention devices, contact your retailer.
- Do not use or store the product in a location exposed to extremely
high or low temperature or susceptible to rapid temperature
changes.
- Do not use the product in extremely humid or dusty locations.
- Do not perform key operations with the touch panel to implement
a process that might endanger life or result in serious damages.
Design a system that can cope with incorrect key input operations.
- Do not use a sharp-edged object, such as a mechanical pencil, to
operate the touch panel in order to prevent scratching or
malfunctions.
- Protect the touch panel against shock to prevent damage.
- CONTEC is not liable for a product that has been modified by the
user.
- For this equipment, use the dedicated power supply unit if
possible. If you connect any other power supply unit, be sure to
select the one that satisfies the voltage and current capacity
standards.
- Never supply power to the power supply connector and the AC
adapter jack at the same time as it can cause a fault.
- When the surface or frame of the touch panel has become dirty,
wipe it with neutral detergent. Do not wipe the touch panel with
thinner, alcohol, ammonia, or a strong chlorinated solvent.
User's Manual
Example: - Exposure to direct sun
- In the vicinity of a heat source
1. Introduction
3