4. Setting the Display
Installation Requirements
To maintain the ambient temperature within the installation
environment requirement range, provide a gap of 30mm or more
between the main unit and any adjacent equipment.
Side view
Panel
30mm or more(back)
Figure 4.1. Distances between the FPD and Its Vicinity
Side view
30mm or more(back)
Figure 4.2. Distances between the FPD and Its Vicinity
User's Manual
30mm or more(above)
Bottom view
30mm or more(Side)
30mm or more
(Bottom)
Panel
30mm or more(above)
Bottom view
30mm or more(Side)
30mm or more
(Bottom)
(with Power Supply Unit IPC-POA200/12-01)
4. Setting the Display
Interface surface
Panel
Interface surface
Panel
19