General Specifications - Contec IPC-DT User Manual

General Specifications

Table 2.2. General Specifications
Condition
Environment
Operating temperature
Storage temperature
Operating humidity
Floating dust
Corrosive gas
Noise Line noise
resistance
Electrostatic
withstanding
voltages
Vibration Sweep
resistance durability
Fixed-vibration
durability
Shock resistance
Structure
Major dimensions (mm)
Panel cut dimensions (mm)
Mountable panel thickness
Weight
Ingress protection
User's Manual
IPC-DT/M20V(PC)T
0 - 50ºC (0 - 40ºC when using an IPC-ACAP12-01 (AC switching adapter))
-10 - 60ºC
10 - 90%RH
(20 - 80% when using an IPC-ACAP12-01 (AC switching adapter))
(No condensation allowed)
Normal
None
AC line: 2 kV, Signal line: 1 kV
(IEC1000-4-4Level3, EN61000-4-4Level3)
(HOST: IPC-BX/M600(PCW) Power supply: IPC-POA200/12-01)
Contact: 4 kV(IEC1000-4-2Level2, EN61000-4-2Level2)
Airborne: 8 kV(IEC1000-4-2Level3, EN61000-4-2Level3)
(HOST: IPC-BX/M600(PCW) Power supply: IPC-POA200/12-01)
10 - 50 Hz/Single-side amplitude or 0.15 mm
50 - 500 Hz/2.0 G in the X/Y/Z directions for 23 minutes each
(Conforming to JIS C0040 and IEC68-2-6)
16.7 Hz/2 G in the X/Y/Z directions for 30 minutes each
(Conforming to JIS C0040 and IEC68-2-6)
10 G in the X/Y/Z directions for 11 ms; Half-sine wave
(Conforming to JIS C0041 and IEC68-2-27)
317(W) x 44(D) x 277(H)
292±0.5(W) x 252±0.5(H)
10 mm or less
3.5kg
Front part conforming to IP65
Specification
IPC-DT/L20S(PC)T
370(W) x 48(D) x 307(H)
344±0.5(W) x 281±0.5(H)
(12 stud holes are required
on the periphery.)
4.4kg
2. Specifications
IPC-DT/H20X(PC)T
428(W) x 48(D) x 336(H)
398±0.5(W) x 306±0.5(H)
(12 stud holes are required
on the periphery.)
5.5kg
9