Connection To The Host Computer; Analog Rgb Connection - Contec IPC-DT User Manual

5. Connection to the Host Computer

Purchase individual connection cables as they are not bundled with
this equipment.

Analog RGB Connection

This connection inputs analog RGB display signals to the
equipment. Connect the cable to the analog RGB connector on the
host computer.
Table 5.1. Recommendation Display Cable
If you use any other cable, select a shielded cable the wire carrying
the RGB and H/Vsync signals and the grounded wire in a twisted
pair. Note that a non-twisted-pair cable may degrade image
quality, in particular, which is longer than 2 m.
User's Manual
Model Maker
KC-V2 SANWA SUPPLY INC.
KC-V5 SANWA SUPPLY INC.
5. Connection to the Host Computer
Cable length
2m
5m
25