Backlight On/Off Connector - Contec IPC-DT User Manual

3. Outside Dimensions and Part Names

Backlight ON/OFF Connector

The equipment has a backlight ON/OFF connector on the back.
Given below are the pin assignment of the connector and its
applicable example.
Table 3.6. Remote Control Cable Connector
Connector type
Pin1-2
Connector Applicable Example
1
2
Figure 3.10. Connector Applicable Example
Notes!
- The connection cable is not bundled with this product; it must be
prepared by the user.
- Backlight ON/OFF control can be implemented by means of
software from the host computer.
However, do not use this software at the same time as the
backlight control on the connector.
18
S2B-XH-A(manufactured by JST)
1 2
Function
Open Backlight ON
Short Backlight OFF
Switch
Applicable connector type
Housing
Contact (two pieces used)
: XHP-2 (manufactured by JST)
: SXH-001T-P0.6(manufactured by JST)
User's Manual