Specifications; Function Specifications - Contec IPC-DT User Manual

2. Specifications

Function Specifications

Table 2.1. Function Specifications < 1 / 2 >
Item
Screen
Assembly type
Screen size
Number of pixels
Display type
Number of colors
Screen adjustment
Brightness control
Backlight control
Display interface
Cable length which recommends
Incoming signal Picture signal
specification
Synchronized
signal
Horizontal scan
frequency
Vertical scan
frequency
Touch panel
Resolution
Detection method
Touch life expectancy
Touch panel interface
Touch panel driver
(Option)
User's Manual
IPC-DT/M20V(PC)T
Panel mounted *1
10.4 inches
640 x 480 dots
TFT Color LCD
262,144 colors
Automatic adjustment (display positioning and scaling) and manual adjustment
using the front switches
Adjustment using the front switch or software control from the host computer
Adjustment using the front switch, software control from the host computer, or
ON/OFF control via the rear-panel connector input
Analog RGB input HD-SUB 15 pin (Female) connector
5mm or less *2
RGB separation, Analog, Positive polarity 0.7Vp-p/75Ω
V/H separation, TTL, Positive / negative polarity
31 - 38kHz
60 - 72Hz
4096 x 4096
Resistive-layer analog method
One million repeated touches (silicon rubber load of 3 N)
Connect to the host computer using either USB*3 or RS-232C.
USB: USB1.1-compliant, TypeB Connector
RS-232C: 9pin D-SUB (Male) Connector
Windows : IPC-SLIB-01
MS-DOS : IPC-TPB1-DRV
Specification
IPC-DT/L20S(PC)T
12.1 inches
800 x 600 dots
262,144 colors
31 - 48kHz 31 - 60kHz
56 - 72Hz 56 - 75Hz
2. Specifications
IPC-DT/H20X(PC)T
15 inches
1024 x 768 dots
16,777,216 colors
7