Dip Switch - Contec IPC-DT User Manual

Dip Switch

A DIP switch is located on the left side of the unit.
Switches 1 - 3 are used as the ID setting when connecting multiple
touch panels via USB. See Chapter 9 for details on connecting
multiple touch panels via USB.
Notes!
- When connecting via RS-232C or a single USB connection, set
switches 1 - 3 to OFF. (The default factory setting)
- Ensure that the power is turned OFF before changing the DIP
switch settings.
ON
Figure 3.9. Dip Switch
Table 3.4. Setting a Dip Switch
No.
1
2
3
4
The USB ID0, 1 and 2 settings specify the ID when connecting
multiple touch panels via USB.
Table 3.5. Setting a USB ID
USB ID
7
6
5
4
3
2
1
0
User's Manual
1 2 3 4
Setting
USBID0
USBID1
USBID2
Reserved
USBID0 USBID1
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
3. Outside Dimensions and Part Names
Setting description
Setting the USB touch panel ID
Setting the USB touch panel ID
Setting the USB touch panel ID
Reserve (Leave this at OFF.)
USBID2
OFF
OFF
OFF
OFF
ON
ON
ON
ON
Factory setting
OFF
OFF
OFF
OFF
17