Specifying Multiple Destination Addresses; Editing A Specified Destination Address - Konica Minolta magicolor 4695MF User Manual

Specifying Multiple Destination Addresses

A destination address can be added if a destination e-mail address is speci-
fied.
If an FTP address or an SMB address was selected, multiple destina-
tion addresses cannot be specified.
1
In the main screen (Scan mode), press the + or , key to select the cur-
rent data destination setting, and then press the Select key.
2
Press the + or , key to select
3
Specify the destination address.

Editing a Specified Destination Address

A specified destination e-mail address can be edited.
FTP addresses, SMB addresses and addresses registered as speed
dial destinations or group dial destinations cannot be edited.
1
In the main screen (Scan mode), press the + or , key to select the cur-
rent data destination setting, and then press the Select key.
2
Press the + or , key to select
key.
3
Press the + or , key to select the e-mail address to be edited, and then
press the Select key.
4
Use the keypad to edit the e-mail address, and then press the Select key.
5
To finish editing addresses, press the Back key.
186
For details on typing in an e-mail address, refer to "Directly Enter-
ing the E-mail Address" on page 180.
For details on selecting from the favorite list, refer to "Selecting
From the Favorite List" on page 181.
For details on selecting a speed dial destination, refer to "Selecting
a Speed Dial Destination" on page 181.
For details on selecting a group dial destination, refer to "Selecting
a Group Dial Destination" on page 182.
For details on selecting from the address book, refer to "Selecting
From the Address Book" on page 183.
For details on searching the address book, refer to "Searching the
Address Book" on page 183.
For details on searching an LDAP server, refer to "Searching an
LDAP Server" on page 184.
For details on entering/editing text, refer to "Entering Text" on page
325.
, and then press the Select key.
ADD
, and then press the Select
CHECK/EDIT
Scanning With the Machine