Konica Minolta magicolor 4695MF User Manual page 309

This message...
NOT INSTALLED I-UNIT
CHECK x
NOT INSTALLED TONER
CHECK x
NOT REGISTERED
OUTPUT TRAY FULL
REMOVE PAPER
OVER SEARCH TIME
PAPER EMPTY
LOAD PAPER (xxx)
PAPER SIZE ERROR
RESET PAPER (xxx)
REMOVE ORIGINAL
IN ADFR
RESULTS ARE OVER xxx
Status, Error, and Service Messages
means...
The indicated imag-
ing unit is not
installed.
The indicated toner
cartridge is not
installed.
No speed dial desti-
nation or group dial
destination is regis-
tered.
The output tray is
full of paper.
Communication with
the LDAP server
has timed out.
The indicated paper
tray has run out of
paper.
Paper of the
selected size is not
loaded in a paper
tray.
The document is
loaded in the ADF
while a function is
set that requires
scanning from the
original glass.
The LDAP search
results exceed the
maximum specified
with
MAX.
SEARCH RESULT
in the LDAP SET-
TING menu.
Do this...
Install the indicated
imaging unit.
Install the indicated
toner cartridge.
Directly type in the
destination address for
the scan data, or regis-
ter a speed dial desti-
nation or group dial
destination and try
specifying the destina-
tion address again.
Remove all paper from
the output tray.
Establish a connection
with the LDAP server
again.
Load media into the
indicated tray.
Load paper of the
selected size into a
paper tray.
Place the document on
the original glass.
Change the maximum
setting, or change the
search conditions (for
example, increase the
length of the key-
word), and then try
performing the LDAP
search again.
295