HP StorageWorks N1200 User Manual page 120

Serial/Telnet User Interface
Scrolling between the Display Pages of the Host List Edit Screen
To scroll up and down the host entries, select P or N.
Selecting a Host
To select a host from the list, enter the number displayed in the "N#" or the
"Num" column at the left of the screen.
Adding a Host to the Host List
To add a host to the Host List, select Add (A).
If the host is an FCP host, the Host Name, Host ID, port WWN, and Node WWN
for FCP host must be entered. (WWN values are hexidecimal) (see
Figure 65: Adding a Host to the Host List - FCP host
If the host is a SCSI host, the host name and the initiator ID must be entered
Figure 66
of a of a SCSI host.
Figure 66: Adding a Host to the Host List - SCSI host
Deleting a Host from the Host List
To remove a host from the Host List, select Delete (D). After entering the number
of the host to delete, a confirmation prompt is displayed.
120
is an example of the screen display when a host is added to the Host List
Network Storage Router N1200 User Guide
Figure 65).