HP StorageWorks N1200 User Manual page 111

Editing the Map Entries of the Current Map
To edit the details of the Current map, in the Map Edit Menu, choose 2) Edit Map
Entries. This editing screen allows the user to navigate up and down the map
entries and create or remove entries. Device lists are also available to make it
easier to identify the device to be mapped.
Note:
to create entries is protocol/port dependent.
Although the options are the same for editing Fibre Channel and SCSI maps, the
screen displays differ.
Figure 55
on page 112 is an example of a screen display for a SCSI map.
Figure 55: Edit Map Entries for a Fibre Channel map
Network Storage Router N1200 User Guide
Mapping a device to its native port/bus is not allowed. The information needed
is an example of a screen display for Fibre Channel maps and
Serial/Telnet User Interface
Figure 56
111