HP StorageWorks N1200 User Manual page 116

Serial/Telnet User Interface
Note:
entered. The Target ID must already be defined in the SCSI configuration.
Creating an Entry for a SCSI Map
To pre-enter a map entry for devices that are not yet online, select Create (C).
Note:
A series of questions is displayed. The questions will vary based on the "Current"
map protocol. Required information includes the Target ID and LUN address,
protocol, port, device name, and device type must be entered (see
Figure 62: Creating an Entry for a SCSI map
116
If the device being added is a SCSI device, the Target ID and LUN ID must be
All essential information about the device must be known.
Network Storage Router N1200 User Guide
Figure 62).