HP StorageWorks N1200 User Manual page 121

Editing Host information
To change host information, select Edit (E).
Current host information is displayed on the screen. The system will display a
series of prompts, allowing changes to be entered.
Figure 67
Fibre Channel port, and
for editing host information for a SCSI bus.
Note:
Figure 67: Editing Host Information on a Fibre Channel port
Network Storage Router N1200 User Guide
is an example of the screen display for editing host information for a
Figure 68
To retain the current information for a prompt, press Enter at the prompt.
on page 122 is an example of the screen display
Serial/Telnet User Interface
121