Verifying Presence Of The Cell Boards; Figure 2-25 The Ls Command Screen - HP RP7405/7410 User Manual

Installation
MP Core I/O Connections
10. A screen similar to the following will appear allowing verification of the settings:
Figure 2-25 The ls Command Screen
To return to the MP main menu, enter ma.
To exit the MP, enter x at the MP main menu.

Verifying Presence of the Cell Boards

To perform this activity, either connect to the management processor (MP) using a console or connect the CE
Tool (laptop) to the RS-232 Local port on the MP.
After login to the MP, verify that the MP detects the presence of all the cells installed in the cabinet. It is
important for the MP to detect the cell boards. If it does not, the partitions will not boot.
To determine if the MP detects the cell boards:
1. At the MP prompt, enter cm.
This displays the Command Menu. Among other things, the Command Menu allows one to view or modify
the configuration and/or look at utilities controlled by the MP.
To look at a list of the commands available, enter he. You may have to press Enter to see more than one
screen of commands. Use the Page Up and Page Down keys to view the previous or next screen of
commands. To exit the Help Menu, enter q.
2. From the command prompt (MP:CM>), enter du.
42
Chapter 2