Figure 2-3 Preparing To Roll Off The Pallet - HP RP7405/7410 User Manual

Step 6. Remove the six bolts from the base attaching the rack to the pallet. See Figure 2-3.

Figure 2-3 Preparing to Roll Off the Pallet

WARNING
Chapter 2
Make sure that the leveling feet on the rack are raised before you roll the
rack down the ramp and any time you roll the rack on the casters. Use
caution when rolling the cabinet off the ramp. A single server in the cabinet
weighs approximately 400 pounds. It is strongly recommended that two
people roll the cabinet off the pallet.
Installation
Unpacking the Server
21