Removing and Replacing a Front Smart Fan Assembly
The Front Smart Fan Assembly is located in the front of the chassis. The fan assembly is a hot swappable
component.
Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
CAUTION
safety precautions could result in damage to the server.
Figure 4-8
Front Smart Fan Assembly Locations
FAN 0
Table 4-1
Front Smart Fan Assembly LED Indications
LED
State
On Green
Fan is at speed and in sync or not at speed less than 6 seconds
Flash
Fan is not keeping up with speed/sync pulse for greater than 6 seconds
Yellow
Flash Red
Fan failed/stalled or has run slow or fast for greater than 6 seconds
Off
Fan is not installed or no power is applied to fan
Chapter 4
Front View
LED
Removing and Replacing a Front Smart Fan Assembly
LED
Meaning
Removal and Replacement
FAN 1
69