Figure 2-26 The Du Command Screen - HP RP7405/7410 User Manual

The du command displays the MP Bus topology. A screen similar to the following appears:
Figure 2-26 The du Command Screen
3. There will be an asterisk (*) in the column marked MP.
4. Verify that there is an asterisk (*) for each of the cells installed in the cabinet, by comparing what is in the
Cells column with the cells physically located inside the cabinet.
Figure 5-9 shows that cells are installed in slots 0 and 1. In the cabinet, there should be cells physically
located in slots 0 and 1.
Chapter 2
Installation
MP Core I/O Connections
43