Removing And Replacing A Bulk Power Supply; Figure 4-14 Bps Location - HP RP7405/7410 User Manual

Removing and Replacing a Bulk Power Supply

The bulk power supply is located in the front of the chassis. The BPS is a hot swappable component.
CAUTION Observe all ESD safety precautions before attempting this procedure. Failure to follow ESD
safety precautions could result in damage to the server.
Figure 4-14 BPS Location
IMPORTANT When a BPS is pulled from the server and then immediately re-inserted, the server can report
an overcurrent condition and shut down.
Chapter 4
BPS Locations
Removal and Replacement
Removing and Replacing a Bulk Power Supply
75