4 Replacement Procedures
4.26 Analog TV tuner
Removing the Analog TV tuner
The following describes the procedure for removing the analog TV tuner (See Figure 4-40).
1. Remove the following screw securing the analog TV tuner.
• M2.0×4B
2. Open the left and right latches and remove the analog TV tuner from the connector
CN2400 on the system board.
Analog TV tuner
CN2400
Installing the analog TV tuner
The following describes the procedure for installing the analog TV tuner (See Figure 4-40).
1. Insert the analog TV tuner firmly into the connector CN2400 on the system board
slantwise and press down it until it is latched.
2. Secure the analog TV tuner with the following screw.
• M2.0×4 B
4-60
[CONFIDENTIAL]
BIND screw
Latch
Latch
Figure 4-40 Removing the analog TV tuner
BIND screw
4.26 Analog TV tuner
×1
M2.0x4B BIND
×1
QOSMIO F30 Maintenance Manual (960-555)