Ejecting The Optical Disk - Toshiba QOSMIO F30 Series Maintenance Manual

4.17 Optical disk drive

4.17.2 Ejecting the optical disk

CAUTION: The following procedure is emergency cope only when the optical disk inside
ODD (here, refers DVD super multi drive to DVD) can not be ejected
because of some failure.
Disassembling the ODD drive assembly
The following describes the procedure for ejecting the optical disk from the optical disk drive
(See Figure 4-29).
1. Remove the following screws securing the ODD cover.
• M1.8×2C
2. Open the ODD cover in the direction of the arrow to remove it from the ODD base
assembly.
3. Hold the optical disk and lift it out.
ODD cover
Optical disk
ODD base assembly
QOSMIO F30 Maintenance Manual (960-555)
S-THIN HEAD screw
M1.8x2C S-THIN HEAD
Figure 4-29 Ejecting the optical disk
4 Replacement Procedures
×4
M1.8x2C S-THIN HEAD
[CONFIDENTIAL]
Hook
4-47