Jack Board - Toshiba QOSMIO F30 Series Maintenance Manual

4.20 Jack board

4.20 Jack board

Removing the Jack board
The following describes the procedure for removing the Jack board (See Figure 4-32).
1. Disconnect the analog TV turner cable from the connector CN9614 on the Jack
board.
2. Disconnect the Jack cable from the connector CN6500 on the system board and
connector CN6510 on the Jack board.
3. Take out the Jack board from the slot of the base assembly.
Analog TV tuner cable
Installing the Jack board
The following describes the procedure for installing the Jack board (See Figure 4-32).
1. Connect the Jack cable to the connector CN6510 on the Jack board.
2. Install the Jack board into the slot of the base assembly.
3. Connect the Jack cable to the connector CN6500 on the system board.
4. Connect the analog TV turner cable to the connector CN9614 on the Jack board.
QOSMIO F30 Maintenance Manual (960-555)
CN9614
Jack cable
CN6500
Figure 4-32 Removing the Jack board
4 Replacement Procedures
CN6510
Jack board
[CONFIDENTIAL] 4-51