Mdc - Toshiba QOSMIO F30 Series Maintenance Manual

4.7 MDC

4.7

MDC

Removing the MDC
The following describes the procedure for removing the MDC (See Figure 4-11).
1. Remove the following screws securing the MDC.
• M2.0×4B
2. Pull the MDC straight up and disconnect the MDC from the connector CN3010 on
the system board.
CAUTION: Be sure to pull the MDC straight up carefully, or the connector may be
damaged.
3. Disconnect the modem cable from the connector on the MDC.
QOSMIO F30 Maintenance Manual (960-555)
BIND screw
MDC
CN3010
Figure 4-11 Removing the MDC
4 Replacement Procedures
×2
M2.0x4B BIND
Modem cable
[CONFIDENTIAL] 4-21