Keyboard - Toshiba QOSMIO F30 Series Maintenance Manual

4 Replacement Procedures
4.6

Keyboard

Removing the keyboard
The following describes the procedure for removing the keyboard (See Figure 4-9 and 4-10).
CAUTION: As the keytop may fall out, when handling the keyboard always hold it by the
frame and do not touch the keytop.
1. Insert your finger into the slot between the keyboard holder and computer. Then lift
up the keyboard holder while unlatching.
2. Remove the following screw.
• M2.5×4B
3. Lift the upper side of the keyboard while releasing the latch and turn it face down on
the palm rest.
Latch
M2.5x4B FLAT BIND
4-18 [CONFIDENTIAL]
FLAT BIND screw
Keyboard holder
Figure 4-9 Removing the keyboard (1)
×2
M2.5x4B FLAT BIND
Keyboard
QOSMIO F30 Maintenance Manual (960-555)
4.6 Keyboard