4.29 North bridge heat sink
4.29 North bridge heat sink
Removing the North bridge heat sink
The following describes the procedure for removing the north bridge heat sink (See Figure 4-
47).
1. Remove the following screws and north bridge heat sink from the system board.
• M2.0×3S
M2.0x3S S-THIN HEAD
Installing the North bridge heat sink
The following describes the procedure for installing the north bridge heat sink (See Figure 4-
47).
1. Install the north bridge heat sink to the system board and secure it with the
following screws.
• M2.0×3S
QOSMIO F30 Maintenance Manual (960-555)
S-THIN HEAD screw
Figure 4-47 Removing the north bridge heat sink
S-THIN HEAD screw
4 Replacement Procedures
×2
North bridge heat sink
×2
[CONFIDENTIAL]
4-67