Auto-Off (Stand-By); Setting The Temperature; Statistics Function; Default Values (Reset) - DeLonghi ESAM04.350 Instructions For Use Manual

1. Press the MENU button to enter the settings menu.
2. Press the or button until "auto-start" is displayed;
3. Press the OK button. "enable?" is displayed;
4. Press the OK button. The hours flash on the display;
5. Press the or button to select the hours;
6. Press the OK button to confirm. The minutes flash on the
display;
7. Press the or button to change the minutes;
8. Press the OK button to confirm. The
under "auto-start" on the display.
9. Press the eSC button to exit the menu. When the appliance
is in stand-by, the
to indicate that auto-start has been programmed.
To disable the function:
1. Press the MENU button to enter the settings menu.
2. Press the or button until "auto-start" is displayed;
3. Press the OK button. "disable?" is displayed;
4. Press the OK button to confirm;
5. Press the ESC button to exit the menu. When the appliance
is in stand-by, the

Auto-Off (Stand-by)

The appliance is set by default to go off if not used for two
hours.
The time can be changed so that the appliance switches off
after 15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme auto-off, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until "auto-off" is displayed;
3. Press the OK button;
4. Press the or button until the required time (15 or 30
minutes, or 1, 2 or 3 hours) is displayed;
5. Press the OK button to confirm;
6. Press the ESC button exit the menu.
auto-off is programmed.

Setting the temperature

To modify the temperature of the water used to make the
coffee, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until "Set temperature" is
displayed;
3. Press the OK button;
4. Press the or button until the required temperature is
displayed (l = low; llll = high);
5. Press the OK button to confirm;
6. Press the ESC button exit the menu.
Setting water hardness
For instructions on setting water hardness, see page 17.
symbol appears
symbol appears next to the clock
symbol is no longer displayed.

Statistics function

This displays statistics relating to the machine.
To display, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until "Statistics" is displayed;
3. Press the OK button;
4. By pressing the or button, you can check:
- how many coffees have been made;
- how many cappuccinos have been made;
- how many times the machine has been descaled;
- the total number of litres of water delivered.
5. Press the ESC button twice to exit the menu.

Default values (reset)

This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set). To reset all settings, proceed as follows:
1. Press the MENU button to enter the menu;
2. Press the or
displayed;
3. Press the OK button;
4. The message "Confirm?" is now displayed;
5. Press the OK button to confirm and exit.

MAKING COFFEE

Please note!
a few seconds may elapse between energy saving mode and
delivery of the first coffee.

Selecting the coffee taste

The appliance is set by default to make coffee with a standard
taste.
you can also choose one of these tastes:
extra-mild taste
Mild taste
Standard taste
Strong taste
extra-strong taste
To change the taste, press the
repeatedly until the required taste is displayed.

Selecting the quantity of coffee in the cup

The appliance is set by default to make a standard quantity of
coffee.
To select the quantity of coffee, press the
8) repeatedly until the message corresponding to the required
quantity of coffee is displayed:
11
button until "default values" is
button (fig. 7)
button (fig.