Auto-Off (Stand-By); Setting The Temperature; Setting Water Hardness; Statistics Function - DeLonghi ESAM 04.320 Owner's Manual

8. Press the OK button to confirm. The
under "auto-start" on the display.
9. Press the ESC button to exit the menu. When the appliance
is in stand-by, the symbol appears next to the clock
to indicate that auto-start has been programmed.
To disable the function:
1. Press the MENU button to enter the settings menu.
2. Press the or button until "auto-start" is displayed;
3. Press the OK button. "disable?" is displayed;
4. Press the OK button to confirm;
5. Press the ESC button to exit the menu. When the appliance
is in stand-by, the symbol is no longer displayed.

Auto-Off (Stand-by)

The appliance is set by default to go off if not used for two
hours.
The time can be changed so that the appliance switches off
after 15 or 30 minutes, or after 1, 2 or 3 hours.
To re-programme auto-off, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until "auto-off" is displayed;
3. Press the OK button;
4. Press the or button until the required time (15 or 30
minutes, or 1, 2 or 3 hours) is displayed;
5. Press the OK button to confirm;
6. Press the ESC button exit the menu.
auto-off is programmed.

Setting the temperature

To modify the temperature of the water used to make the
coffee, proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until Set temperature" is
displayed;
3. Press the OK button;
4. Press the or button until the required temperature is
displayed (l = low; llll = high);
5. Press the OK button to confirm;
6. Press the ESC button exit the menu.

Setting water hardness

For instructions on setting water hardness, see page 16.

Statistics function

This displays statistics relating to the machine. To display,
proceed as follows:
1. Press the MENU button to enter the settings menu.
2. Press the or button until "Statistics" is displayed;
3. Press the OK button;
4. Press the or button, you can check:
- how many coffees have been made;
- how many times the machine has been descaled.
symbol appears
- the total number of litres of water delivered.
5. Press the ESC button twice to exit the menu.

Default values (reset)

This resets all menu settings and programmed quantities back
to the default values (with the ex-ception of the language
which remains as set).
1. Press the MENU button to enter the menu;
2. Press the
displayed;
3. Press the OK button;
4. The message "Confirm?" is now displayed.
5. Press the OK button to confirm and exit.

MAKING COFFEE

Please note!
a few seconds may elapse between "energy saving" mode and
delivery of the first coffee.

Selecting the coffee taste

The appliance is set by default to make coffee with a standard
taste.
you can also choose one of these tastes:
extra-mild taste
Mild taste
Standard taste
Strong taste
extra-strong taste
To change the taste, press the
repeatedly until the required taste is displayed.

Selecting the quantity of coffee in the cup

The appliance is set by default to make a standard quantity of
coffee.
To select the quantity of coffee, press the
8) repeatedly until the message corresponding to the required
quantity of coffee is displayed:
Corresponding
coffee
My CoFFee
ShorT
STaNdard
loNg
EXTRA LONG
11
or button until "default values" is
button (fig. 7)
button (fig.
ESPRESSO lONG COFFEE
(ml) (ml)
program. program. from
from 20 to 180 20 to 250
≃40 ≃ 125
≃60 ≃ 175
≃90 ≃ 210
≃120 ≃ 250