Setting Water Hardness; Measuring Water Hardness; Set Water Hardness; The Machine Is Now Reprogrammed With The New Water Hardness Setting - DeLonghi ESAM04.350 Instructions For Use Manual

Bean to cup espresso and cappuccino machine
Table of Contents

Advertisement

10. Press the OK button to start rinsing. hot water flows out
o
of the spout and the message "rinsing Please wait" is
displayed.
11. When the water tank is completely empty, the message
"Rinsing complete Press OK" is displayed.
12. Press the OK button. The appliance goes off
automatically.
To turn the appliance on again, press the

SETTING WATER HARDNESS

The deSCale message is displayed after a period of time
established according to water hardness.
The machine is set by default for a hardness value of 4.
The machine can also be programmed according to the actual
hardness of the mains water in the various regions, varying the
frequency with which the message is displayed.
e

Measuring water hardness

1. remove the "ToTal hardneSS TeST" (a24) indicator
paper from its pack.
2. immerse the paper completely in a glass of water for one
s
second.
3. after about a minute, 1, 2, 3, or 4 red squares form,
depending on the hardness of the water. each square
corresponds to one level.
.
level 1
e
lmmm
r
level 2
llmm
level 3
lllm
level 4

Set water hardness

e
1. Press the MENU button to enter the settings menu.
s
2. Press the or button and select "Water hardness".
.
3. Confirm the selection by pressing the OK button.
4. Press or to set the water hardness identified using the
indicator paper (see figure in the previous section).
5. Press the OK button to confirm the setting.
s
6. Press the ESC button to exit the menu.
The machine is now reprogrammed with the new water
r
hardness setting.
g
llll

TECHNICAl SPECIFICATION

voltage:
absorbed power:
Pressure:
Water tank capacity:
Size: lxhxd:
Cable length:
Weight:
button.
Max. beans container capacity:
The appliance complies with the following eC directives:
Stand-by Directive no. 1275/2008
Low Voltage Directive 2006/95/EC and subsequent
amendments;
EMC Directive 2004/108/EC and subsequent
amendments
Materials and accessories coming into contact with food
conform to the provisions of eC regulation 1935/2004.

DISPOSAl

important information for correct disposal of the
product in accordance with eC directive 2002/96/eC.
at the end of its working life, the product must not
be disposed of as urban waste.
it must be taken to a special local authority differentiated
waste collection centre or to a dealer providing this service.
disposing of a household appliance separately avoids
possible negative consequences for the environment and
health deriving from inappropriate disposal and enables the
constituent materials to be recovered to obtain significant
savings in energy and resources.
as a reminder of the need to dispose of household appliances
separately, the product is marked with a rubbish bin bearing
a cross.
17
220-240 v~ 50/60 hz max. 10a
1350W
15 bar
1,8 l
282x364x425 mm
1,5 m
11 Kg
200 g

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents