SOYO SY-P4I875P DRAGON 2 V1.0 User Manual page 78

Mpga socket 478 processor supported intel 875p agp/pci 533/800 mhz front side bus supported atx form factor
Hide thumbs Also See for SY-P4I875P DRAGON 2 V1.0:
Table of Contents

Advertisement

BIOS Setup Utility
Others Optional
Setting
Password
POWER ON
Function
Hot KEY
Mouse Move
Mouse Click
Any KEY
BUTTON-ONLY Disables the Wake-Up by
Keyboard 98
If [POWER ON Function] is set to [Password]
Enter
(your
KB Power ON
password)
Password
If [POWER ON Function] is set to [Hot Key]
Ctrl-F1~F1
Hot Key Power
2
ON
Onboard FDC controller
Onboard FDC
controller
Onboard Serial Ports
Setting
Disabled
Onboard
3F8/IRQ4
Serial Port 1 /
Serial Port 2
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto
SY-P4I875P DRAGON 2 V1.0
Description
Enables you to wake-up the
system by entering a password on
the keyboard.
You can wake-up the system by
pressing the key combination of
your choice (Ctrl-F1~F12).
Enables waking up the system by
pressing either the right or left
mouse button.
Keyboard function.
Allows you to power on a system
using this type or keyboard.
Set the password that will wake-up your
system.
Choose the key combination that will wake-up
the system. [Ctrl-F1 to Ctrl-F12]
Setting
Description
Disabled
Turn off the on-board
floppy controller
Enabled
Use the on-board floppy
controller
Description
Choose serial port 1 & 2's I/O
address.
Do not set port 1 & 2 to the same
setting except for Disabled or
Auto.
73
Note
Default
Note
Default
Note
Default
(port 1)
Default
(port 2)

Advertisement

Table of Contents
loading

Table of Contents