Quick Bios Setup - SOYO SY-P4I875P DRAGON 2 V1.0 User Manual

Hardware Installation
Repeat this operation until you get the following screen.
3. The BIOS Setup screen appears:
Phoenix – Award BIOS CMOS Setup Utility
SOYO COMBO Feature
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
Esc : Quit
F10 : Save & Exit Setup
Change CPU's Clock & Voltage

2-3 QUICK BIOS SETUP

This Motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO FEATURE]. The [SOYO COMBO FEATURE] combines
the main parameters that you need to configure, all in one menu, for a quick
setup of the BIOS.
After the hardware installation is complete, turn the power switch on,
then press the <DEL> key during the system diagnostic checks to
enter the Award BIOS Setup program. The CMOS SETUP UTILITY
will be shown on the screen. Then, follow these steps to configure the
CPU settings.
SY-P4I875P DRAGON 2 V1.0
PC Health Status
Load Fail - Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
44