SOYO SY-P4I875P DRAGON 2 V1.0 User Manual page 36

Hardware Installation
5. Universal Serial Bus (USB1/USB2, USB3/USB4, USB20_1/USB20_2)
This Motherboard provides 8 USB2.0 ports for your additional devices. Plug
the USB device jack into the available USB connector USB1, USB2, USB3
and USB4.
USB20_1 and USB20_2 are available. To make use of these USB ports,
purchase a USB cable from your dealer. The lay-out of USB20_1/USB20_2
connector is as follows:
GND
GND
(+)Data
(-)Data
Power
USB20_1 and USB20_2 support USB2.0 devices.
6. Onboard Game port/audio (Audio Speakers connections)
When using 2-channel speaker, connect the speaker cable to Line-out.
If you're using 4 channel speaker, connect the front L/R speakers to Line-out
and rear L/R speakers to Line-in. Make sure that the audio software is set for
4 channel speaker system.
Use the SPDIF Card to use 6 channel speaker.
SY-P4I875P DRAGON 2 V1.0
10
5
GND
4
9
(+)Data
3
8
(-)Data
7 2
Power
6 1
Line-in
Line-out
Mic-in
31