Chapter 8 Ich5R (Sata1/Sata2) Setup Information - SOYO SY-P4I875P DRAGON 2 V1.0 User Manual
Mpga socket 478 processor supported intel 875p agp/pci 533/800 mhz front side bus supported atx form factor
Hide thumbs
Also See for SY-P4I875P DRAGON 2 V1.0:
- User manual (145 pages) ,
- User manual (143 pages) ,
- User manual (133 pages)
Table of Contents
Advertisement
ICH5R (SATA1/SATA2) Setup Information
ICH5R (SATA1/SATA2) Setup Information
You can use your ICH5R as
1. Normal IDE function.
2. RAID 0 function (Stripping).
To use SATA1 and SATA2 as normal IDE, please do the following steps
1.
Go to the CMOS setup
set the "IDE1, 2/SATA1, 2" to "SATA only " or "IDE + SATA"
(depending on your system configuration.)
2.
Set "SATA Mode" to "IDE "
3.
Then start installing Windows operating system. No driver is needed.
To use SATA1 and SATA2 as RAID 0 function, please do the following
steps
1.
Go to the CMOS setup
set the "IDE1,2/SATA1,2" to "SATA only " or "IDE + SATA"
(depending on your system configuration.)
2.
Set "SATA Mode" to "RAID0"
3.
Press "Ctrl + I" when the ICH5RBIOS summary screen appears.
4.
Create a disk array,
5.
Install ICH5R driver, see driver installation instruction below
Note: Only Windows XP can use "Enhance Mode" (SATA1, SATA2,
IDE1 and IDE2 at the same time.)
SY-P4I875P DRAGON 2 V1.0
Chapter 8
Soyo combo Feature
Soyo combo Feature
104
onchip device
and
onchip device
and
Advertisement
Table of Contents
Troubleshooting
