SOYO SY-P4I875P DRAGON 2 V1.0 User Manual page 110

ICH5R (SATA1/SATA2) Setup Information
Installing ICH5R during OS Installation
Install driver during Windows XP installation
1. Set the folder options to "show hidden files and folders", check
Microsoft help for more info on how to set this option.
2.
Go to "d:\drivers\Intel_iaa\floppy" directory, (assuming that
your CD-ROM is drive d) copy all the files to a floppy disk.
3. Windows XP will start to inspect your hardware configuration
4. Press "F6" when the message "Press F6 if you need to install a
third party SCSI or RAID driver...." Appear. Below the screen
5. Press key to specify additional devices when the
S
window appears.
Setup
6. Insert the floppy disk of driver, then press
7. In the follow-on window of device type, please select
82801ER SATA RAID Controller"
8. The follow-on interface will list the devices to be installed, in
which
"Intel ® 82801ER SATA RAID Controller"
be included. (If users want to install other devices, press "S" at this
time.) Press ENTER to continue Windows XP setup.
Installing Driver on an Existing System
For windows XP
1. Place the driver CD into the CD-ROM drive
2. Choose the model P4I875P DRAGON 2 V1.0
3. Highlight the "Intel Application Accelerator RAID Edition
for Win XP" and then click install
Note: RAID 0 can only work under Windows XP, other operating
system is not supported.
SY-P4I875P DRAGON 2 V1.0
to continue
Enter
to continue installation
105
Windows XP
"Intel ®
item should