Atx12V Power Supply - SOYO SY-P4I875P DRAGON 2 V1.0 User Manual
Mpga socket 478 processor supported intel 875p agp/pci 533/800 mhz front side bus supported atx form factor
Hide thumbs
Also See for SY-P4I875P DRAGON 2 V1.0:
- User manual (145 pages) ,
- User manual (143 pages) ,
- User manual (133 pages)
Table of Contents
Advertisement
Hardware Installation
F. ATX12V Power Supply
The power supply connector is the last connection to be made when installing
a motherboard. This motherboard requires an ATX 12V power supply. AT or
ATX power supplies cannot be used. We recommend a power supply of at
least 350W, or 400W under full loading.
Steps:
1. Connect the 20 pin connector to the ATX power connector. See FIG. 1.
2. Connect the 4 pin connector to the +12V power connector. See FIG. 2.
Note 1: The presence of the +12V power connector indicates
that a power supply is ATX12V; the absence of the +12V
power connector indicates that a supply is ATX.
SY-P4I875P DRAGON 2 V1.0
ATX Power
+12V Power Connector
39
Advertisement
Table of Contents
Troubleshooting
