Chapter 7 Ali M5281 Serial Ata Driver Installation - SOYO SY-P4I875P DRAGON 2 V1.0 User Manual

ALi M5281 Serial ATA Driver Installation
ALi M5281 Serial ATA Driver Installation
You can use your SATA3/SATA4 as
1. Normal IDE function.
2. RAID function. (RAID0, 1)
To use SATA3 and SATA4 as normal IDE, please do the following steps
1. Go to the CMOS setup
Device and set the "RAID IDE3,4/ SATA3,4" to enable.
2. Install the ALi M5281driver. See driver installation instruction
below.
To use SATA3 and SATA4 as RAID controller, please do the following
steps
1. Go to the CMOS setup
Device and set the "RAID IDE3,4/ SATA3,4" to "Enable".
2. Go to the CMOS setup
"First Boot Device" to "Other Device".
3. Set the "Other Device Boot Order" to "SATA3/SATA4, SCSI".
4. Press "Ctrl+A" when the ALi M5281 BIOS summary screen
appears..
5. Create RAID set, check appendix A for more info on creating
RAID set.
To boot from the ALi M5281 controller, (SATA3 or SATA4)
1. Go to the CMOS setup
First Boot Device to "Other Device".
2. Set the "Other Device Boot Order" to "SATA3/SATA4,SCSI".
SY-P4I875P DRAGON 2 V1.0
Chapter 7
SOYO COMBO Feature
SOYO COMBO Feature
SOYO COMBO Feature
SOYO COMBO Feature
101
Onboard
Onboard
and set the
and set the