Rear Panel Connections - D-Link DSL-G604T User Manual

Rear Panel Connections

All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on
the Router. Use the Reset button to restore the settings to the factory default values in the next chapter for
instructions on using the reset button).
Connect network cables:
1. Insert the ADSL (telephone) cable included with the Router into the ADSL port and then connect the cable
to your telephone line.
2. Insert one end of the Ethernet cable into the Ethernet (LAN) port on the back panel of the Router and the
other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
ADSL Port
Use the ADSL cable to connect to
the your telephone line (RJ-11
port)
Page 13 of 110
DSL-G604T Generation II ADSL2+ Wireless Modem Router
Ethernet Port
Use the Ethernet port to
connect the Router to
your Ethernet LAN or
computer
Power Insert
Use the adapter
shipped with the
Router to connect to
power source
www.dlink.com.au