Rip - D-Link DSL-G604T User Manual

DSL-G604T Generation II ADSL2+ Wireless Modem Router
A DoS "denial-of-service" attack is characterised by an explicit attempt by attackers to prevent legitimate users
of a service from using that service. Examples include: attempts to "flood" a network, thereby preventing
legitimate network traffic, attempts to disrupt connections between two machines, thereby preventing access to
a service, attempts to prevent a particular individual from accessing a service, or, attempts to disrupt service to
a specific system or person.
Port scan protection is designed to block attempts to discover vulnerable ports or services that might be
exploited in an attack from the WAN.
The Service Filtering options allow you to block FTP, Telnet response, Pings, etc, from the external network.
Check the category you want to block to enable filtering of that type of packet.
When you have selected the desired Firewall policies, click the Apply button to enforce the policies. Remember
to save any configuration changes.

RIP

The Router supports RIP v1 and RIP v2 used to share routing tables with other Layer 3 routing devices on your
local network or remote LAN.
RIP System Wide Configuration menu
To enable RIP, select Enabled from the RIP pull-down menu, select the Protocol (RIPv1 and RIPv1
Compatible) and Direction (In, Out, or Both), and click Apply.
The RIPv1 Compatible option will transmit RIPv2 broadcast packets and receive both RIP v1 and RIP v2
packets.
The direction configuration refers to the RIP request. Select In to allow RIP requests from other devices. Select
Out to instruct the Router to make RIP requests for routing tables from other devices. Select Both to share
routing tables in both directions.
Page 71 of 110 www.dlink.com.au