Rear Panel Connections; Reset - D-Link DSL-G624T User Manual

DSL-G624T Wireless ADSL Router User Guide

Rear Panel Connections

All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on
the Router. Use the Reset button to restore the settings to the factory default values. See below for reset
button location.
Connect network cables:
Insert the ADSL (telephone) cable included with the Router into the ADSL port and then connect the cable
to your telephone line.
Insert one end of the Ethernet cable into the Ethernet (LAN) port on the back panel of the Router and the
other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
Power Insert
ADSL Port
Ethernet Ports
Use adapter
Use the ADSL cable
Connect the Router
shipped with the
to connect to the
to your Ethernet
Router to connect
your telephone line
LAN or computer
to power source
Antenna

Reset

Antenna must be securely
To manually reset, depress
fastened to threaded post
button with the power on for
at least seven seconds
Reset
To Reset the Router to factory default settings including the default IP address 192.168.1.1, depress the reset
button on the right side panel with a ballpoint pen, paper clip or similar object for a few seconds. The device
will restart with default settings.
6