Wep; Wireless Security - D-Link DSL-G604T User Manual

Wireless Security

In the Wireless Settings window, select the type of security you want to configure. The window will change to
present the settings specific to the method being configured. The Router's wireless security options include
three levels of WEP encryption, WPA for IEEE 802.1x network authentication, and WPA with a user-configured
Pre Shared Key (PSK).

WEP

WEP (Wired Equivalent Protocol) encryption can be enabled for security and privacy. WEP encrypts the data
portion of each frame transmitted from the wireless adapter using one of the predefined keys. The router offers
64-, 128-, or 256-bit encryption with four keys available.
To bring up the Wireless Settings window for WEP, click the WEP radio button.
1. Make sure the Enable AP checkbox at the top of the window has been checked.
2. Click the Enable WEP Wireless Security checkbox.
3. From the drop-down menu, select an Authentication Type: Open, Shared, or Both.
4. Select a key by clicking a radio button on the left, select an encryption level from the drop-down menu on
the right, and then enter the proper-length key. (Key length is outlined at the bottom of the window.)
5. Click Apply.
Notice If encryption of any kind, at any level is applied to the Wireless network, all devices on the network
must comply with all security measures.
Page 31 of 110
DSL-G604T Generation II ADSL2+ Wireless Modem Router
Wireless Settings menu – WEP
www.dlink.com.au