Static Ip Address - D-Link DSL-G604T User Manual

DSL-G604T Generation II ADSL2+ Wireless Modem Router

Static IP Address

When the Router is configured to use Static IP Address assignment for the WAN connection, you must manually
assign a global IP Address, Subnet Mask and Gateway IP Address used for the WAN connection. Most users will
also need to configure DNS server IP settings in the DNS Configuration window (see below). Follow the
instruction below to configure the Router to use Static IP Address assignment for the WAN connection.
To configure a Static IP Address connection, perform the steps listed below. Some of the settings do not need
to be changed the first time the device is set up, but can be changed later if you choose. See the table below
for a description of all the settings available in this window.
WAN Settings window - Static IP
Page 40 of 110 www.dlink.com.au