Rear Panel Connections
All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on the Router.
Use the Reset button to restore the settings to the factory default values in the next chapter for instructions on using the
reset button).
Connect network cables:
1. Insert the ADSL (telephone) cable included with the Router into the ADSL port and then connect the cable to
your telephone line.
2. Insert one end of the Ethernet cable into one of the LAN ports on the back panel of the Router and the other
end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
ADSL Port
Use the ADSL cable to
connect to the your telephone
line (RJ-11 port)
DSL-584T ADSL Router User Guide
Ethernet Ports
Use the Ethernet ports
to connect the Router
to your Ethernet LAN
or computer
To manually reset, depress
for at least seven seconds
4
Reset Button
button with the power on
Power Insert
Use the adapter
shipped with the
Router to connect to
power source