DSL-G604T Generation II ADSL2+ Wireless Modem Router
ATM VCC
The ATM VC Setting window is used to configure the WAN connection. If you are using multiple PVCs, you can
change the configuration of any PVC in this window. To create new or additional PVCs, read the section on
Multiple PVCs.
This window can be used as an alternative to configure the same settings found on the WAN Settings window in
the Home directory.
ATM VC Settings menu
To configure an existing PVC configuration set, click the corresponding notepad icon in the right-hand column of
the ATM VCs List. The PVCs current settings appear above in the entry fields of the ATM VC Setting window.
Configure the appropriate settings and click the Apply button to put the new settings into effect.
Page 73 of 110
www.dlink.com.au