Wizard
To use the Setup Wizard, click the Run Wizard button in the first browser window and follow the instructions in
the pop-up window that appears.
The initial window summarizes the setup process. Click the Next button to proceed. You may stop using the
Setup Wizard at any time by clicking the Exit button. If you exit the wizard you will return to the Setup
Wizard window without saving any of the settings changed during the process.
The first pop-up window of the Setup Wizard lists the basic steps in the process. These steps are as follows:
1. Set the system time.
2. Configure the connection to the Internet.
3. Save the new configuration settings and reboot the system.
Page 20 of 110
DSL-G604T Generation II ADSL2+ Wireless Modem Router
www.dlink.com.au