Rear Panel Connections - D-Link DSL-G624M User Manual

Rear Panel Connections

All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on the Router.
Use the Reset button to restore the settings to the factory default values in the next chapter for instructions on using the
reset button).
Use the ADSL
cable to connect
telephone line
Note
DSL-G624M Wireless ADSL Router User's Guide
ADSL port
to the your
(RJ-11 port)
Auto MDI/MDIX LAN Ports
These ports automatically sense
the cable type when connecting
to Ethernet-enabled computers.
To manually reboot the Router, disconnect wait 10 seconds and then
reconnect the power.
For wireless
operation, mount
the antenna on
the threaded
antenna post.
Reset button
To manually
reset, depress
button with the
power on for at
least 5 seconds
Ethernet ports
6
Antenna
Power insert
Use the adapter
shipped with the
Router to
connect to
power source