Snmp - D-Link DSL-G604T User Manual

SNMP

Simple Network Management Protocol is a standard for internetwork and intranetwork management.
Configure these parameters for SNMP on the Router:
SNMP Category
SNMP Management
Community
Traps
Page 62 of 110
DSL-G604T Generation II ADSL2+ Wireless Modem Router
SNMP Management window
Parameters
This is used to enable or disable SNMP Agent and SNMP Traps or edit client SNMP Name,
Location and Contact.
Enable SNMP Agent: Click to select enable or disable SNMP Agent.
Enable SNMP Traps: Click to select enable or disable SNMP Traps.
Use this edit client community for server SNMP access.
Name: Edit community Name.
Access Right: Access Right may choose ReadOnly or ReadWrite.
The management agent can send an event notification to the management system to identify
the occurrence of conditions such as threshold that exceeds a predetermined value.
Destination IP: Insert destination IP address to launch trap message.
Trap Community: Insert Trap Community name.
Trap Version: Drop-down menu allows you to select SNMP v1 or SNMP v2c.
www.dlink.com.au