Setting Site Specific Option Number (Sson); Using The View Administrative Option - Avaya J100 Series Installing And Administering

• Protocol: Specifies the type of protocol. The options are TCP, UDP, or TLS. The
corresponding parameter is SIPSIGNAL.
• SIP Port: Specifies the SIP port. If no value is entered, SIP port uses 5060 as the
default port for UDP/TCP or 5061 for TLS. If Transport Type is UDP/ TCP, the
corresponding parameter is SIP_PORT_ SECURE.
9. Press Save.
Related links
Configuring the phone using Administration menu

Setting Site Specific Option Number (SSON)

About this task
The Site Specific Option Number (SSON) is used by the phones to request information from a
DHCP server. This number must match a similar number option set on the DHCP server. The
number option set on the DHCP server defines the various settings required by the phone.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the administation menu password.
3. Press Enter.
4. Select SSON.
5. In the SSON field, enter the new SSON.
The number must be between 128 to 254.
6. Press Save.
Caution:
Do not perform this procedure if you are using static addressing. Perform this
procedure if you are using DHCP addressing and the DHCP option number is changed
from the default number.
Related links
Configuring the phone using Administration menu

Using the VIEW administrative option

About this task
Use this procedure to view the parameters associated with the admin procedures.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
July 2019 Installing and Administering Avaya J100 Series IP Phones
Comments on this document? infodev@avaya.com
on page 74
on page 74
Phone configuration
87