TRENDnet TV-IP662WI User Manual page 57

TRENDnet User's Guide
7. Camera's login page will appear.
Configure DDNS on your router
1. Go to Camera's NetWork  Ports Settings section, assign a HTTP port for your
camera and click Apply.
2. Login to your router's web configuration page.
Find the Dynamic DNS configuration section.
© Copyright 2014 TRENDnet. All Rights Reserved.
3. Enable DDNS, fill out the following information and then click Apply.
4. Go to Virtual Server* section and create a new entry.
Enable: Click Enable
Name: Enter the application name (eg. Camera Name)
Protocol: Select TCP
Private Port: The HTTP port that you assign on your Camera.
Public Port: The port used on remote side to access to your Camera.
LAN Server: The local IP address of your Camera.
Click Add to add the application.
* Please refer to your router's user's manual for detail Virtual Server setting.
Some router might use Port Forwarding or Special applications for this
TV-IP662WI
56