Time And Date - TRENDnet TV-IP662WI User Manual

TRENDnet User's Guide

Time and Date

In the Time Configuration section, we can configure the following.
Select the Time Zone option from the drop-down menu. Tick the Enable Daylight Saving
option to enable the daylight saving feature on this camera. Select the Auto Daylight
Saving option to automatically receive the daylight saving update from the time server.
Select the Set DST Manually option to manually configure the daylight saving time
options. After selecting to manually configure the daylight saving time, select the Offset
value used. Select the Start time and End time options.
© Copyright 2014 TRENDnet. All Rights Reserved.
In the Automatic Time Configuration section, we can configure the following.
Tick the Synchronize with Network Time Protocol server option to enable the
automatic time configuration option. Enter the NTP Server address of the time server
used here or select the Set NTP Server from DHCP option to allow the camera to obtain
the date and time settings from the NTP Server that is configured to run in collaboration
with the DHCP server on your local network.
In the Set Date and Time Manually section, we can configure the following.
Tick the Setup Date and Time Manually option to manually configure the date and time
settings for this camera. Select the Year, Month, Day, Hour, Minute, and Second
options from the drop-down menus provided to manually configure the date and time
settings used by the camera. Alternatively, click the Sync with Computer Time button to
automatically configure the camera's date and time settings to be the same as the
current date and time settings on the local computer. Click the Apply button to apply
the modifications made.
TV-IP662WI
33