Snapshot - TRENDnet TV-IP662WI User Manual

TRENDnet User's Guide

Snapshot

Snapshots can be taken by this camera based on the trigger by event. In the Snapshot
section, we can configure the following.
Tick the Enable option to enable the snapshot feature. Select the Trigger by option from
the drop-down list. Options to choose from are Motion, Schedule, Always, and Sound.
The parameters available for configuration will change depending on the selections
made.
After selecting the Motion option as the Trigger by event, the following can be
configured.
© Copyright 2014 TRENDnet. All Rights Reserved.
Selecting Motion, will tell the camera only to take snapshots when motion is detected.
Tick the Schedule option to only take snapshots for motion at specific times of the
week. Tick the Day and enter the Start and End times.
After selecting the Schedule option as the Trigger by event, the following can be
configured.
Selecting Schedule, will tell the camera to always take snapshots within the scope of the
schedule configured. Tick the Day and enter the Start and End times.
After selecting the Always option as the Trigger by event, the following can be
configured.
Selecting Always, will tell the camera to always take snapshots.
After selecting the Sound option as the Trigger by event, the following can be
configured.
Selecting Sound, will tell the camera only to take snapshots when sound is detected.
Tick the Schedule option to only take snapshots when sound is detected at specific
times of the week. Tick the Day and enter the Start and End times.
TV-IP662WI
46