Web Browser Management - TRENDnet TV-IP662WI User Manual

TRENDnet User's Guide

Web Browser Management

After completing the Autorun Wizard from the CD, you are ready to use your camera.
The camera's built-in Web configuration utility is designed to allow you to easily access
and configure your TV-IP662WI camera. Open a web browser such as Internet Explorer®
and enter the IP address of your camera (through the setup wizard utility software on
the CD). To log in, type the Username admin and the password you created in the
Autorun Wizard. If you did not create a password or you just press the reset button for
reset, the default password is admin. After entering your password, click OK.
Note: By default, this camera obtains an IP address from a DHCP server on the local
network. To find the IP address of the camera, consult the DHCP client list on the DHCP
server on your wireless router or install the Setup Wizard utility software from CD.
However, if there is no DHCP server available, the static default IP address of this
camera is 192.168.10.30, in case you are connecting the camera directly with your PC
without another device in-between.
These initial steps are using Internet Explorer.
To log in, type the Username admin and the password you created in the Setup Wizard.
If you did not create a password, the default password is admin. After entering your
password, click OK.
© Copyright 2014 TRENDnet. All Rights Reserved.
After you have logged in, Internet Explorer will prompt you to install the camera add-on
required. Click Allow to install the add-on.
After the add-on was successfully installed, the Live View video feed will be displayed.
TV-IP662WI
23